You are here: Home » Products » Organic Silane » N- β -Aminoethyl-γ-Aminopropyl trimethoxysilane

Product Category


Share to:

N- β -Aminoethyl-γ-Aminopropyl trimethoxysilane

  • NJK-603


ENERGYCO CODE: NJK- 603        

CHEMICAL NAME: N- β -Aminoethyl-γ-Aminopropyl trimethyloxyilane

CAS NO.: 1760-24-3



Base Information

Chemical Name: N-[3-(Trimethoxysilyl)propyl]ethylenediamine

CAS No.:1760-24-3

Molecular Formula:C8H22N2O3Si

Molecular Weight:222.36

EINECS No.:217-164-6

Hs Code.:29310095

Mol file:1760-24-3.mol

Synonyms:1,2-Ethanediamine,N-[3-(trimethoxysilyl)propyl]- (9CI);(2-Aminoethyl)(3-(trimethoxysilyl)propyl)amine;DynasylanDAMO-T;Geniosil GF 9;N-(Aminoethyl)aminopropyltrimethoxysilane;N-b-Aminoethyl-g-aminopropyyltrimethoxysilane;Prosil 3128;SilaneA 0700;en-APTAS;g-(Ethylenediamino)propyltrimethoxysilane;N-(β-aminoethyl)-γ-aminopropyl]trimethoxysilane;[3-(2-Aminoethyl)Aminopropyl]Trimethoxysilane;

Chemical Property of


Chemical Property:

Appearance/Colour: colorless transparent liquid 

Vapor Pressure: 0.059mmHg at 25°C 

Melting Point: 0ºC 

Refractive Index: n20/D 1.444(lit.)  

Boiling Point: 272.2 ºC at 760 mmHg 


Flash Point:108.1 ºC 


Density:0.975 g/cm3 

LogP: 0.89410 

Storage Temp.: Store below +30°C. 

Sensitive: Air & Moisture Sensitive 

Solubility: Miscible with toluene. 

Water Solubility.: REACTS 

Purity/Quality: 99% 3-(2-Aminoethylamino)propyl]trimethoxysilane 

Safty Information:


Hazard Codes: Xn,Xi 


Safety Statements:26-39-61-37/39-24-36/37/39-23 


Uses This substance is used in the following products: adhesives and sealants, coating products and finger paints. Other release to the environment of this substance is likely to occur from: indoor use and outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives).

service life Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).

Introduction N-[3-(Trimethoxysilyl)propyl]ethylenediamine (equal to A-1120, GF 91, KBM603) is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. N-[3-(Trimethoxysilyl)propyl]ethylenediamine is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as "coupling agent" leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. Applications: N-[3-(Trimethoxysilyl)propyl]ethylenediamine may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties. Used as an effective coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite. Used as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and expoxy thermoset composites. Used as a mineral binders in in foundry and abrasive composite applications, to improve adhesion, increase composite strength. Used as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces. Used as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants.

Chemical Properties Colorless transparent liquid

Uses N-[3-(Trimethoxysilyl)propyl]ethylenediamine has also been used as an organic ligand for the surface modification of silica gel to uptake heavy metal ions. It can react with fluorinated carbon nanotubes (F-CNT) to form aminoalkylalkoxysilane functionalized carbon nanotubes.

Uses [3-(2-Aminoethylamino)propyl]trimethoxysilane has been used in the synthesis of various polyhedral silsesquioxanes, (RSiO1.5)n (SSQO).It can be functionalized onto the mesoporous SBA-15 silica to be used as matrices for controlled drug delivery.It is also used in the synthesis of silane-based polymer, which is used in conducting instant adhesives.

Flammability and Explosibility Not classified

Contact allergens This amine-functional methoxysilane, referenced as aminoethyl aminopropyltrimethoxysilane, was impli- cated in the production of glass filaments.




 Copyright © 2023 ENERGYCO LTD. Sitemap | Support By Leadong 苏ICP备2023024252号-1